jb JFT Metallized Polypropylene Film AC Capacitor Class-X1

 Recently we receive some good project for JFT Class X1 MKP film capacitor, it seems the market needs increased. We offer very good price, high quality and short delivery time for JFT series.

Please send us inquiry if you have needs.

JFT - Metallized Polypropylene Film AC Capacitor Class-X1 
Features:
* This specifications cover the requirements of jb Metallized Polypropylene
* Film AC Capacitor (Interference Suppressors Class-X1)

Specifications:
Capacitor Class “X1” stands for X1 class
Climatic Category: 55/ 105/ 21
Operating Temperature Range    -55°C~ +105°C (for which the capacitor can be operated continuously at rated voltage.
Rated Voltage   300V.AC, 440V.AC
Capacitance Range : 0.0022 ~ 4.7μF
Capacitance Tolerance: ±10%
Insulation Resistance: (I.R.) >=15,000 MOhm (C<=0.33μF) >=5,000 MOhm (C>0.33μF)
Dissipation Factor:(DF) 0.001 (0.1%)max. at 1KHz

jb Super Capacitors,also Called Double-Layer Storage Capacitor

jb-The Comparison of Aluminum Electrolytic Capacitor and Conductive Polymer Aluminum Solid Capacitor

 Below Table  shows the comparison of Aluminum Electrolytic Capacitor and Conductive Polymer Aluminum Solid Capacitor. Aluminum Electrolytic Capacitor is widely used in the rectifier circuits due to the huge capacity and lower price.

Conductive Polymer Aluminum Solid Capacitors which is one of the high-end capacitors besides tantalum electrolytic capacitor, consisting of high conductive polymer, electrolyte powders. Conductive Polymer Aluminum Solid Capacitor plays a role in rectifying the peak and noise of current, enhancing the stability of power circuit.

	Aluminum Electrolytic Capacitor	Conductive Polymer Aluminum Solid Capacitors
Dielectric material	Electrolyte	PEDT
Appearance	Aluminum shell with plastic cover, and vent open, shown as fig.1.	Aluminum shell with Spec. marked on the top, without vent open, shown as figure 2.
Temp. Feature	Low Temp: Frozen electrolyte	High stability
	High Temp: Swelled or exploded
Cost	Low	High
Size	Big	Small
Resistance	High	Low
Working Frequency	Low	High
Application	Consumer electronics, industrial application, IT & communication and automobile electronics..etc	Circuit Breaker Power Meter, MDL Power Logger, camera, LED signboard, PC, server, IPC, CPU motherboard and Graph card… etc.

jb three kinds of ceramic capacitors

 jb Capacitors manufactures and markets Ceramic Capacitors, Including X1 / CD Y1 400VAC and CE Y2 300AC Safety Standard Recognized Capacitors and 1KV, 2KV, 3KV,4KV, 5KV, 6KV, 8KV, 10KV, 15KV DC High Voltage Ceramic Capacitors, Multilayer (mono) Axial & Radial Ceramic Capacitors.

JYA - X1 / Y1(CD 400VAC) and Y2(CE 300VAC) Safety Standard Recognized Capacitors
The X1 / Y class safety-certified capacitors, used in line-to-ground (line bypass) applications, have voltages from 400VAC (Y1 series)/300VAC (Y2 series) and X1 series. Major features of these non-polar capacitors include capacitance range generally from 10pF to 10000pF; from 7.5mm to10mm lead spacing, high reliability, and kinked or straight lead configurations.
jb Class X1 / Y Safety Capacitors ideal for across the line applications, compact size, cost effective product, safety standards recognized.

JYC – High Voltage Ceramic Radial Type Disc Capacitors
We designs and manufacture high quality Ultra-High Voltage Ceramic Capacitors Radial-Leaded Single Layer Disc (low loss type) Capacitors with blue coating epoxy resin, custom design radial lead disc ceramic capacitors as well as a variety of standard and custom High Voltage & High Capacitance value Ceramic Capacitors.

JYM - Multilayer (Mono) Ceramic Capacitors
Multilayer ceramic capacitors are available in a variety of physical sizes and configurations, including leaded devices and surface mounted chips. Leaded styles include molded and conformally coated parts with axial and radial leads. However, the basic capacitor element is similar for all styles. It is called a chip and consists of formulated dielectric materials which have been cast into thin layers, interspersed with metal electrodes alternately exposed on opposite edges of the laminated structure. The entire structure is fired at high temperature to produce a monolithic block which provides high capacitance values in a small physical volume. After firing, conductive terminations are applied to opposite ends of the chip to make contact with the exposed electrodes. Termination materials and methods vary depending on the intended use. Our JYM - Multilayer (Mono) Ceramic Capacitors, it can be made 25VDC and 100VDC. The leads can be bended for mounting purpose.
Above are our three kinds of Ceramic capacitors now. If you cannot find suitable products, please feel free to mail us.

We will try our best to find the substitution for you. Mail us to get more information!